Connect to the internet in BT5 with wvdial
April 8, 2012 Leave a comment
>>immediately wrote this tutorial I made:
1. Download master wvdial in:
okay, if use dual OS download it in its OS continue to keep an d d drive you can later open in BT5, well there was already living there extracted readme wrote.
2.After a successful download on another OS and then moving to OS Backtrack readme and install according to which there exist d after install, type the following command in terminal:
Please see if your modem has been detected.
3.then if your modem has been detected type the following command:
- root@bt:~# wvdialconf /etc/wvdial.conf
That order was originally ..
4. Then setting the modem in:
- root@bt:~#gedit /etc/wvdial.conf
5.when it was edited wvdial.conf with this format:
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = USB Modem
Baud = 460800
New PPPD = yes
Modem = /dev/ttyACM0
ISDN = 0
Phone = < Modem dial number >
Password = <provider password>
Username =< provider username >
then save it.
6. And then type in terminal:
- root@bt:~# wvdial
that was his way. please try, good luck. 🙂